Immersion Sampler
Spectrographic analysis of steel is essential for production in the melt shop. Immersion samplers are used for taking samples of molten metal. The sampling probes are designed with advance techniques for a safe, rapid and direct sampling and for reduction of total sampling and analysis time for producing clean steel. Our product lines includes standard or customized samplers for applications in all types of steel & iron samplers for blast furnaces, basic oxygen furnaces, degasser, ladle treatment stations & anywhere else a representative, homogenous sample of molten metal is needed.
We manufacture Immersion Samplers in the following shapes
- Round Samplers
- Oval Samplers
- Dual Thickness Samplers
- Stream Samplers
- Blast furnace samplers
- Immersion Samplers with varying paper tubes lengths up to 2000 mm.
FEATURES
- Samples can be obtained within 5 seconds
- Samples are easily detachable from the spoon
- De-oxidants as per customer requirements (Plain, Aluminium, Titanium, Zirconium)
- Zero defect samples (absence of pin holes)
USING METHOD
Sample taken from the metal bath must be Representative, Free of inclusions, cracks and holes Suitable, in shape and size. While taking the sample of molten metal the sampler should be sunk to the depth depending on the temperature and the viscosity of the melt at an angle of 55° for 3 to 5 second (the depth and time should be strictly carried out for its best performance).
After taking the sample instrument from the furnace, knock the non immersed part on the ground, so the sample of steel will fall down on the ground. It is best to take a sample when the molten steel temperature is above 1500°C.
APPLICATION
It is used for process analysis of molten metal for instantaneous sampling techniques and reinforces quality control. This product is used for sampling directly from a stream or a ladle spoon.
ADVANTAGE
Cost Effective, quality built, precise, accurate & reliable to use
Packing: 25 or 50 Pcs. per Cardboard box.
|
