|
Hot Metal Ladle Upto 300mt Capacity REMSO is the leading the manufacturer and exporter of Hot Metal Ladle Steel ladles of sizes from 10 MT to 300 MT capacity are manufactured from IS: 2002 boiler quality plates as well as IS: 2062 plates. Design
The Hot metal ladle shall be of circular design with all welded construction and reinforced by two stiffener rings with special reinforcement in the area of the trunnions (similar to AISE-Standard No. 9).. The material for the ladle shell and bottom shall be Gr 2 as per IS:2002 (latest revision) or E 250 B as per IS 2062 (2006) or as per the customer specification. After complete welding, the ladleall be stress relieved.Trunnion: Tilting Mechanism:
Welding: All weld joints shall be full penetration double groove butt weld with backgauged roots and all butt joints shall be fully radiographed. The ladle is alsprovided with tilting mechanism outside the shell for tilting. A tilting device is provided at the ladle bottom.• Fabrication, Finite element analysis, Repairs, Modifications, Upgrading, Ladle lifting devices, Ladle Slide Gates, Ladle Tilters, Ladle Preheat Stand, Ladle Preheating System / Dryer.The trunnion plate shall be annealed after forging and shall be ultrasonically tested for soundness. The forged trunnion pins are welded into the trunnion ring and into the ladle shell. The trunnions shall be designed with a minimum factor of safety of 8. Suitable flange shall be welded inside the ladle for retaining the permanent refractory lining.
|
